Atmoslab Rezepte

 

BIG BUBBLE

Mixing

STRAWBERRY   flavour 75%

VANILLA  flavour  25%

For 10ml eliquid

STRAWBERRY  flavour  12 drops

VANILLA  flavour  4 drops

created by user  CEASAR  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use BLACK VANILLA instead of VANILLA for a more dry vaping.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

ΝUTTELLA

 

Mixing

CHOCOLATE PREMIUM  flavour  50%

NOCCIOLA  flavour 50%

For 10ml eliquid

CHOCOLATE PREMIUM flavour 8 drops

NOCCIOLA flavour 8 drops

created by user   poseidonas_7   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use BLACK VANILLA instead of VANILLA for a more dry vaping.

--------------------------------------------------------------------------------------------------------------------------------

APPLE ICE

Mixing

GREEN APPLE  flavour 80%

MINT   flavour 20%

For 10ml eliquid

GREEN APPLE  flavour 7 drops

MINT  flavour 2 drops

created by user  djfloor   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use PEPPERMINT instead of MINT. You will get a more "fresh" vaping APPLE ICE .

--------------------------------------------------------------------------------------------------------------------------------

APPLE PIE

Mixing

CINNAMON COOKIES flavour 45%

RED APPLE  flavour 15%

VANILLA flavour  25%

CARABELA   flavour 15%

For 10ml eliquid

CINNAMON COOKIES flavour  18 drops

RED APPLE  flavour 6 drops

VANILLA  flavour  9 drops

CARABELA  flavour  6drops

created by user  Bill_tsiminieras   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet " APPLEPIE. 

--------------------------------------------------------------------------------------------------------------------------------

BLACK FOREST

 

 

Mixing

CHOCOLATE  PREMIUM flavour 55%

CHERRY  flavour 25%

CARABELA flavour 20%

For 10ml eliquid

CHOCOLATE  PREMIUM  flavour  14 drops

CHERRY  flavour 6 drops

CARABELA flavour  5 drops

created by user  MPOMPOS  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 3-4 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use also STRAWBERRY and RODI instead of CHERRY . It depends on how much sour your eliquid has to be to meet your personal standards.

--------------------------------------------------------------------------------------------------------------------------------

Cachoca

Mixing

CAMILA  flavour  20%

CHOCOLATE  PREMUM  flavour 50%

CARAMELA   flavour  20%

VANILLA  flavour  10%

For 10ml eliquid

CAMILA   flavour  4 drops

CHOCOLATE  PREMUM  flavour 8 drops

CARAMELA flavour  4 drops

VANILLA flavour  2 drops

created by user  ΑΛΕΞΑΝΔΡΟΣ-13   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use also CARABELA  instead of CΑRAMELA     , or BLACK VANILLA instead of VANILLA for a more dry vaping

--------------------------------------------------------------------------------------------------------------------------------

CAPTAIN BLACK - WHITE

Mixing

CAMILA  flavour  50%

VANILLA  flavour  25%

BLACK  CHOCOLATE  flavour  25%

For 10ml eliquid

CAMILA   flavour 8 drops

VANILLA  flavour 5 drops

BLACK  CHOCOLATE  flavour  5 drop

created by user  panos  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use BLACK VANILLA instead of VANILLA for a more dry vaping.

--------------------------------------------------------------------------------------------------------------------------------

CHERRY PIPE TOBACCO

Mixing

CAMILA  flavour 70%

KAPNOS  flavour  25%

CHERRY   flavour  5%

For 10ml eliquid

CAMILA   flavour 8 drops

KAPNOS  flavour 3 drops

CHERRY  flavour  1 drop

created by user  panos  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR  TIP :

You can add just 1 drop VANILLA  flavour and 1 drop  CARABELLA flavour  (OPTIONALLY)  for a a slightly sweetish sense of tobacco.

--------------------------------------------------------------------------------------------------------------------------------

CHOCOAPPLE

Mixing

CHOCOLATE PREMIUM flavour 60%

RED APPLE  flavour 40%

For 10ml eliquid

CHOCOLATE PREMIUM flavour 6 drops

RED APPLE  flavour 4 drops

created by user  mouko  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CHOCOLATE  BLACK instead of CHOCOLATE PREMIUM. You will get a more "sweet" CHOCOAPPLE. Interesting alternative also is the mixing of CACAO in the place of one CHOCOLATE flavour.Also instead of RED APPLE  you can use GREEN APPLE to enhance the freshness of vaping.

--------------------------------------------------------------------------------------------------------------------------------

CINNACCINO

Mixing

CAPUCCINO  flavour  85%

CINNAMON  COOKIES   flavour  15%

For 10ml eliquid

COFFE  flavour 12 drops

CAMILA  flavour  2 drops

created by user   bananajoe   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

--------------------------------------------------------------------------------------------------------------------------------

COFFEE LUST

Mixing

COFFE  flavour 70%

VANILLA  flavour 30%

FRESH LEMON (FRUIT)

For 10ml eliquid

COFFE  flavour 10 drops

VANILLA  flavour 7 drops

FRESH LEMON   1 drop

created by user  Bill-tsiminieras  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use BLACK VANILLA instead of VANILLA for a more dry vaping.

--------------------------------------------------------------------------------------------------------------------------------

FOREST

"Forest" is a very nice flavour, having complex aroma and great aftertaste.

Mixing

CARAMELA flavour 40%

CHESTNUT flavour 30%

BLACKBERRY flavour 15%

CHERRY flavour 15%

For 10ml eliquid

CARAMELA flavour 8 drops

CHESTNUT flavour 6 drops

BLACKBERRY flavour 3 drops

CHERRY flavour 3 drops

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 3-4 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use also STRAWBERRY, BLUE RASPBERRY and RODI instead of CHERRY and BLACKBERRY. It depends on how much sour your eliquid has to be to meet your personal standards.

--------------------------------------------------------------------------------------------------------------------------------

GREEN FRESH

"Green Fresh" is a mixture of Green Apple with refreshing Mint and Peppermint. You will get a tremendous refreshing eliquid which will get you totally satisfied.

Mixing

APPLE GREEN flavour 60%

MINT flavour 30%

PEPPERMINT flavour 10%

For 10ml eliquid

APPLE GREEN flavour 11 drops

MINT flavour 5 drops

PEPPERMINT flavour 2 drops

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use (especially if you are a menthol-lover) just MINT in the mix. You will get a more "rough" Menthol flavour. Peppermint is used to get the eliquid more mild by masking the final aroma mixture

--------------------------------------------------------------------------------------------------------------------------------

HOVABACCO

Mixing

CAMILA  flavour 60%

VANILLA flavour  10%

HONEY  MOON    flavour 30%

For 10ml eliquid

CAMILA  flavour  8 drops

VANILLA  flavour  2 drops

HONEY  MOON   flavour  4drops

created by user  Bill_XPIRE    of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use BLACK VANILLA instead  of VANILLA  for amore dry vape!!!!

--------------------------------------------------------------------------------------------------------------------------------

INDIANA CARAMEL

Mixing

CARAMELA flavour  30%

APACHE  flavour  70%

For 10ml eliquid

CARAMELA flavour  4 drops

APACHE   flavour  8 drops

created by user  ELIOT   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet" INDIANA  CARAMEL.

--------------------------------------------------------------------------------------------------------------------------------

LOLLIPOP

Mixing

KAPNOS  flavour  50%

CARABELA   flavour 30%

VANILLA   flavour 10%

FOTIA   flavour 10%

For 10ml eliquid

KAPNOS  flavour  8 drops

CARABELA   flavour  7 drops

VANILLA   flavour 1 drops

FOTIA   flavour 1 drops

 

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARAMELA instead of CARABELA . You will get a more "sweet " LOLLIPOP .

--------------------------------------------------------------------------------------------------------------------------------

OLIMERA

Mixing

CAMILA  flavour 45%

KAPNOS  flavour  25%

CARABELA   flavour 15%

VANILLA   flavour 10%

FOTIA   flavour 5%

For 10ml eliquid

 

CAMILA  flavour  12 drops

KAPNOS  flavour  8 drops

CARABELA   flavour  4 drops

VANILLA   flavour 2 drops

FOTIA   flavour 1 drops

 

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARAMELA instead ofCARABELA . You will get a more "sweet "OLIMERA.

--------------------------------------------------------------------------------------------------------------------------------

ORANGE PIE

Mixing

CINNAMON COOKIES flavour 45%

ORANGE  flavour 15%

VANILLA flavour  25%

CARABELA   flavour 15%

For 10ml eliquid

CINNAMON COOKIES flavour  18 drops

ORANGE  flavour 6 drops

VANILLA  flavour  9 drops

CARABELA  flavour  6drops

created by user  Bill_tsiminieras   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet " APPLEPIE.

--------------------------------------------------------------------------------------------------------------------------------

OUZITO

"Ouzito" is a greek version of Mojito using the world famous greek Ouzo to provide the master flavour.

Mixing

OUZO flavour 60%

LIME flavour 30%

MINT flavour 10%

For 10ml eliquid

OUZO flavour 9 drops

LIME flavour 5 drops

MINT flavour 2 drops

 

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

--------------------------------------------------------------------------------------------------------------------------------

PASTELI

Mixing

KAPNOS    flavour 60%

HONEY   flavour  40%

For 10ml eliquid

KAPNOS   flavour  6 drops

HONEY   flavour  4 drops

created by user  djfloor  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

--------------------------------------------------------------------------------------------------------------------------------

POCAHONTAS

Mixing

APACHE flavour 70%

CARAMEL   flavour 25%

STRAWBERRY    flavour 5%

For 10ml eliquid

APACHE  flavour 7 drops

CARAMEL   flavour   4 drops

STRAWBERRY  flavour 1 drops

created by user  kos-greece  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet" POCAHONTAS.It has a wonderful fresh aroma with e great light  contrast due to the STRAWBERRY 

--------------------------------------------------------------------------------------------------------------------------------

PURO HAVANA

Mixing

APACHE flavour 50%

VANILLA   flavour 20%

CHOCOLATE  PREMIUM   flavour 20%

CARAMEL   flavour 10%

For 10ml eliquid

APACHE  flavour 6 drops

VANILLA  flavour 2 drops

CHOCOLATE  PREMIUM  flavour 2drops

CARAMEL   flavour   1 drops

created by user stefakis1  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet"PURO  HABANA .It brings you memories of CUBA and the great cigars of the country.

--------------------------------------------------------------------------------------------------------------------------------

RED CHERMINTELA

Mixing

 CARAMELA flavour 75%

 CHERRY  flavour   10%

RED APPLE  flavour 10%

MINT   flavour 5%

For 10ml eliquid

CARAMELA flavour 7 drops

CHERRY  flavour 2drops

RED APPLE  flavour 2 drops

MINT   flavour  1  drops

created by user  bsd  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweet" RED  CHERMINTELA.

--------------------------------------------------------------------------------------------------------------------------------

RUSSIAN PINA COLADA

"Russian Pina Colada" is a russian version of famous Pina Colada, using the Vodka instead of Rum.

Mixing

COCONUT flavour 50%

PINEAPPLE flavour 40%

VODKA flavour 10%

For 10ml eliquid

COCONUT flavour 9 drops

PINEAPPLE flavour 7 drops

VODKA flavour 2 drops

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can decrease/increase COCONUT/PINEAPPLE according your personal taste. You can also avoid using VODKA at all and get a very nice tropical cocktail eliquid. If you put also BANANA (almost 10%) the final mix will become more "delicious" (BANANA is combined perfectly with COCONUT and PINEAPPLE).

--------------------------------------------------------------------------------------------------------------------------------

SMOKED COFFEE

Mixing

CAMILA  flavour  60%

KAPNOS  flavour  30%

COFFEE    flavour  10%

For 10ml eliquid

CAMILA  flavour 8  drops

KAPNOS   flavour 4 drops

COFFEE   flavour  3 drop

created by user   XPIRE   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

for your vape. Pleasant and long lasting aftertaste.

--------------------------------------------------------------------------------------------------------------------------------

SMOKER’S DE-LIGHT

Mixing

CAMILA  flavour  60%

CHOCOLATE PREMIUM   flavour  5%

COFFEE  flavour  35%

For 10ml eliquid

COFFE  flavour 8 drops

CAMILA  flavour 5 drops

 PREMIUM  CHOCOLATE  flavour  1 drop

created by user  panos  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use CHOCOLATE ELEGANT instead of PREMIUM  if you prefer   semisweet ,detailed aromatic notes for your vape. Pleasant and long lasting aftertaste.

--------------------------------------------------------------------------------------------------------------------------------

SMOKY SPARKLE

 

Mixing

COLA-COLA  flavour  10%

HONEY  MOON   flavour  45%

KAPNOS   flavour  45%

For 10ml eliquid

KAPNOS  flavour 25 drops

HONEY  MOON  flavour 25 drops

COLA-COLA  flavour  5 drop

created by user  alexmach of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

ATTENTION !!

Be  careful when dropping ,better , last minute the COLA-COLA flavour .Because of its sparkling intense it is better if you pour at first 2 drops and then give it a try vaping it. You  shall definitely  feel the freshness of COLA -COLA!!

--------------------------------------------------------------------------------------------------------------------------------

SPICY PIPE

Mixing

 KAPNOS  flavour  50%

 FOTIA    flavour   10%

HONEY  MOON  flavour  40%

For 10ml eliquid

KAPNOS  flavour  2 drops

FOTIA    flavour  10 drops

HONEY  MOON  flavour  2 drops

created by user  demkoni  of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

--------------------------------------------------------------------------------------------------------------------------------

Sweet & Dry Tobacco

Mixing

CAMILA  flavour 65%

BARBARA   flavour 10%

VANILLA flavour  10%

CARAMEL    flavour  5%

HONEY  MOON    flavour 10%

For 10ml eliquid

CAMILA  flavour  8 drops

BARBARA     flavour 2 drops

VANILLA  flavour  2 drops

CARAMEL  flavour  1 drops

HONEY  MOON   flavour  2 drops

created by user  Bill_XPIRE    of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use CARABELA instead of CARAMELA. You will get a more "sweetish " flavour.

--------------------------------------------------------------------------------------------------------------------------------

THE REFRESH - AIR

Mixing

COFFE  flavour 75%

CHOCOLATE  PREMIUM   flavour 25%

For 10ml eliquid

COFFE  flavour 12 drops

CHOCOLATE  PREMIUM   flavour 4 drops

created by user  Teodor   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You  can use BLACK CHOCOLATE  instead of PREMIUM  CHOLATE  for a more mild, pure aroma

--------------------------------------------------------------------------------------------------------------------------------

TROPICAL

Mixing

BANANA   flavour 30%

STRAWBERRY  flavour 50%

CHOCOLATE  BLACK  flavour 10%

MINT  flavour 5%

MELON  flavour 5%

For 10ml eliquid

BANANA   flavour 8 drops

STRAWBERRY  flavour 10 drops

CHOCOLATE  BLACK flavour 3drops

MINT  flavour 1 drops

MELON  flavour 1 drops

created by user  Voltaire   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

FLAVOUR SWITCH:

You can use PEPPERMINT,CHERRY instead of MINT and  STRAWBERRY flavour  

--------------------------------------------------------------------------------------------------------------------------------

VAPISM

Mixing

VANILLA  flavour 40%

CARAMELA    flavour 20%

COFFEE    flavour 5%

CINNAMON  COOKIES    flavour 15%

STRAWBERRY    flavour 15%

ORANGE     flavour 5%

For 10ml eliquid

VANILLA  flavour 6  drops

CARAMEL   flavour 3 drops

COFFE   flavour 1 drops

CINNAMON  COOKIES    flavour  2 drops

STRAWBERRY   flavour  2 drops

ORANGE   flavour 1 drops

created by user  OLDHABITS   of e-kapnisma.gr the greek vapers'forum

Instuctions:

Before mixing to produce your eliquid, you have to create the base (where the flavours will be added). It will have 5% greater nicotine level than our target level of eliquid (after adding 5% of flavours, nicotine level will decrease 5%).

In an empty 10ml bottle add all flavours'drops. Add the base up to 1/3 of the bottle volume and shakesmoothly. After 1 min add another 1/3 of the base. Shake again for 1 min. Add the final 1/3 of the base and shake again for another 1 min.

If you notice air bubbles inside your bottle, do not worry. They are caused by rough shaking due to the presence of glycerin (possibly) which is a very good capturer of air bubbles. After a few minutes they will disappear.

You can vape your creation although it can be even better in the near future.

After 2-3 days, the eliquid will be really ready-to-vape. Every fresh-mixed eliquid needs time for the contents to develop some chemical bonds between each other.

 

FLAVOUR SWITCH:

You can use CHERRY and CARABELA  flavour instead of STRAWBERRY  and CARAMELA !!

--------------------------------------------------------------------------------------------------------------------------------

Zuletzt angesehen